Главная / Lonsdor / Lonsdor KH100+

Мультифункциональный программатор чипов и ключей Lonsdor KH100+

18 500 руб.
поделиться

KH100 + - это последняя модернизированная версия старого KH100, она включает в себя все функции, которые имел KH100

1.Modern appearance design, in line with the operating habits of the public. 
2.Device system comes with operation instructions, easier for you to use. 
3.It covers almost all the functions of the similar products in the market.
4.Built-in super sensor to collect data(over-range data collection).
5.Exclusive support for 8A(H chip) generation. 
6.Built-in WIFI module, can connect to network at any time
7.4-pack remotes & smart key involved
8.Handy chip holder integrated,902MHZ supported
9.Toyota 8A Smart Key Direct copy to Add key(Latest Update)

Lonsdor KH100+ Functions:
When complete the registration activation, it enters below menu interface:


Identify Copy
Enter this menu, follow system prompts to operate (as shown).

Access card cloning
Enter this menu, you can identify and copy IC card, and generate garage key as well. Follow the prompts to operate(as shown below).

Simulate Chip
Put KH100+'s antenna at the ignition switch(as shown), choose the corresponding chip type to simulate.
This device supports below chip types: ①4D ②46 ③48 ④47


Generate Chip
Put below types of chip into the induction slot(as shown), choose the corresponding chip to operate according to the prompts.
This device supports below chip types: ①4D ②46 ③48 ④T5 ⑤7935 ⑥8A ⑦4C ⑧Chip conversion

Note: some chip data will be covered and locked.

Generate Remote
Enter [Generate key]->[Generate remote], choose the corresponding vehicle type to generate remote control(as shown) according to different regions.

Generate Smart key(card):
Enter [Generate key]->[Generate smart key] menu, choose the corresponding vehicle type to generate smart key/card(as shown) according to different regions.

Identify Coil:
①Search smart induction area Connect remote key with remote connector, Put KH100+'s antenna close to the pre-determined position. If inductive signal is identified, the device will continuously make sounds, please check if the position is right(as shown below).
②Detect IMMO Connect remote key with remote connector, Put KH100+'s antenna close to key identification coil, and use key to turn ignition ON. When KH100+ buzzer beeps, it means signal is detected.

Remote Frequency
Enter this menu, put remote control at the device’s induction area to detect remote frequency.

Special function:
Include: detect infrared signal, unlock Toyota smart key, FT Toyota smart key, Charge key, More functions, to be continued...
Detect infrared signal
   
Put remote control at the infrared signal detection area, press the remote's button once. When the light on KH100+'s screen is on, it indicates there is infrared signal, otherwise there is no signal(see below pic).

FT smart key
   
For Toyota or Lexus smart keys from Lonsdor, you can perform the following functional operations: read version info, modify key value, unlock and upgrade program and etc. Put in the smart key, click [select] to operate.

Unlock Toyota smart key/detect Toyota key status
   Put in the smart key, click OK to operate.

Charge key
   For a chargeable key with battery, you can perform this function. Put in the key, click [OK] to operate.


 

Назад